New Settings to adjust Wifibooth to your camera

Built-in WiFi only.
weakmap
Posts: 22
Joined: Sun Jan 05, 2020 9:50 am

New Settings to adjust Wifibooth to your camera

Postby weakmap » Sat Jan 25, 2020 5:11 am

[ENG]

New Settings to adjust Wifibooth to your camera

Wifibooth is working great with the cameras listed here http://wifibooth.com/help/articles/supported-cameras/. However, Wifibooth has default settings (such as delays for specific functions) that are set depending on the camera vendor. While this is fine most of the time, some vendors have quite some different processors/wifi antennas build into their cameras.
This can result in Wifibooth being a bit slower than necessary as it always has to respect the slowest camera it supports by this vendor.
Panasonic is such an example. Wifibooth supports a range of Panasonic cameras, but as the FZ80 is relatively slow, the GH 5 for instance is very fast when it comes to processing.

To overcome this and reduce unnecessary wait times, Tim has thankfully created an option to change the timings.
You can find this opening the Settings-App and search for “Wifibooth”.
Image
When changing the settings, make sure to restart Wifibooth afterwards. (Make sure to not only close it, but to kill the app using the App-Switcher)

For the GH-5 for instance, it’s fine to set the values to those that you can see in the screenshot. Note, the values are in seconds, this means setting a value to 0.5 means half a second.

Changing these values only works if you have the option “Faster Camera” and “Slower Camera” turned off. Also keep in mind, changing these values might cause Wifibooth to stop functioning correctly. If you experienced any issue, please revert the settings (or just remove the value, Wifibooth will then take the default values)


----------
[DE]

Neue Einstellungen um Wifibooth an deine Kamera anzupassen

Wifibooth arbeitet mit den folgenden Kameramodellen zusammen http://wifibooth.com/help/articles/supported-cameras/
Allerdings nutzt Wifibooth standard Einstellungen (Zum Beispiel Auslöseverzögerungen), die pro Kamera-Hersteller greifen.
Das ist grundsätzlich auch in Ordnung (Es wäre ein wahnsinniger Obverhead, jedes Model einzeln zu betrachten), allerdings sind dadurch manche Kamera-Operationen langsamer, als sie sein müssten.
Die Kameras von Panasonic sind ein gutes Beispiel. Wifibooth unterstützt eine breite Palette an Panasonic Kameras. Das Model FZ80 ist hierbei allerdings wesentlich langsamer als die GH 5. Grundsätzlich muss Wifibooth aber bei jedem Hersteller von der langsamsten Kamera ausgehen um keine ungewollten Seiteneffekte zu produzieren.

Um dieser Problematik entgegenzuwirken, hat Tim eine neue Option innerhalb des Wifibooth Einstellungen eingebaut.
Du findest die Einstellung, indem du die Einstellungs-App öffnest und nach dem Punkt “Wifibooth” suchst.
Image
Wenn du die Einstellungen änderst, starte anschließend Wifibooth bitte komplett neu. (Beende Wifibooth indem du die App im “App-Switcher” schließt.
Für die Gh 5, kannst du zum Beispiel die Einstellungen nutzen, die ich im Screenshot zeige. Hierbei gewinnst du zwischen Auslösen des Fotos und anzeige ca 5 Sekunden.
Beachte, dass die angezeigten Werte in Sekunden dargestellt werden. 0.5 heißt in diesem Falle also eine halbe Sekunde.

Die Einstellungen greifen lediglich, wenn du die Optionen “Schnellere Kamera” und “Langsamere Kamera” deaktiviert hast.

Bitte beachte auch, dass diese Einstellungen (wenn zu niedrig) dazu führen können, dass Wifibooth nicht mehr ordentlich arbeitet. Sollte dies der Fall sein, kannst du die Werte einfach wieder zurück setzen oder die Felder leeren, dann wird auch wieder der Standard Wert genutzt.

User avatar
tim
Site Admin
Posts: 3068
Joined: Fri Apr 03, 2015 5:14 pm

Re: New Settings to adjust Wifibooth to your camera

Postby tim » Sat Jan 25, 2020 9:38 am

Awesome thanks for the write-up!
Please write a review for Wifibooth on the Apple App store! Indie developers like me really need people like you to review their apps. Instructions on how to write a review: http://goo.gl/w8NsDI.

tmayr
Posts: 3
Joined: Fri May 22, 2020 1:14 pm

Re: New Settings to adjust Wifibooth to your camera

Postby tmayr » Fri May 22, 2020 2:04 pm

Hey Tim,

ich habe das Problem, dass die App immer nach dem Foto in einen „Bitte Warten“-Modus geht und diesen nicht beendet.
Die Kamera ist dabei schon lange fertig und bereit für das nächste Foto. Das Foto ist gespeichert aber es ist ohne Beendigung der App nicht möglich ein neues zu machen. Hat dies eventuell auch mit den genannten Zeiteinstellungen in der App zu tun?
Mein Setup:
iPad Air IOS 12.4.7
Sony alpha 5000

Vielen Dank im Vorraus

User avatar
tim
Site Admin
Posts: 3068
Joined: Fri Apr 03, 2015 5:14 pm

Re: New Settings to adjust Wifibooth to your camera

Postby tim » Sun Jun 14, 2020 10:50 am

Hallo tmayr,
Das kann Kamera Einstellungen sein...
Ist das Kamera auf JPG modus?
Neuest version von smart remote sony app?
Please write a review for Wifibooth on the Apple App store! Indie developers like me really need people like you to review their apps. Instructions on how to write a review: http://goo.gl/w8NsDI.


Return to “Help: Cameras with Built-in WiFi”