hi everyone
so i bought this canon pixma ts6120 and i have set my wifibooth to be landscape but it wont print in landscape and i did buy 5x7 and set my wifibooth to be 5 x7 can someone help me plz
landscape printing
Re: landscape printing
How do the photos print out?
Please write a review for Wifibooth on the Apple App store! Indie developers like me really need people like you to review their apps. Instructions on how to write a review: http://goo.gl/w8NsDI.
Re: landscape printing
https://1drv.ms/f/s!AuteM2zdHneAigG47cIsZUkPq2F2
the one on purple background are printed and the red border is the ipad
the one on purple background are printed and the red border is the ipad
Re: landscape printing
Ok. If you go to event settings -> layout -> is the size set to 5x7? And is it locked to landscape? If so, does your printer have some setting that it is doing zoom?
Please write a review for Wifibooth on the Apple App store! Indie developers like me really need people like you to review their apps. Instructions on how to write a review: http://goo.gl/w8NsDI.
Re: landscape printing
layout in wifibooth is 5x7 and the printer when i load the paper i set it to 5x7 if i use the printer app it does print less zoomed but from the application it really zooms in and i need it for the photobooth im planning
Re: landscape printing
These will probably sound like very silly questions, mostly, but 30 years of IT support experience have taught me to always ask the silly questions. Just for those rare occasions when the answer turns out to be, "...Oops. Never mind!" (I once solved someone's printing problems over the phone, by asking whether they'd remembered to plug the printer back in after they mentioned having moved it. "...Oops. Never mind!")
You're loading the paper according to Canon's instructions, right?
You're loading the paper according to Canon's instructions, right?
- Basically, standing up in the rear tray, portrait-oriented (short edge feed first), centered in the slot.
http://gdlp01.c-wss.com/gds/2/030002733 ... df#page=10 - Normally if you aren't, the printer detects that the paper dimensions don't match the expected configuration and will display an error message. (But, that detection can be disabled.)
http://gdlp01.c-wss.com/gds/7/030002781 ... f#page=169
- (Paper size would be listed in "Options", looks like.)
http://gdlp01.c-wss.com/gds/7/030002781 ... f#page=202
- Tell the printer the truth about what's loaded, but leave Wifibooth set at 5x7.
- (It almost looks like what you're getting is being sized for a full-page Letter/A4 landscape print.)
Re: landscape printing
i can relate as i work.in consumer care so i did the steps i want to show you the results in the print center it is showing letter size .. how can i change it to 5x7 i tried while it tried to print?
https://1drv.ms/f/s!AuteM2zdHneAigG47cIsZUkPq2F2
update: when i do my collage then print it from gallery it does print 5x7 without zooming as i set my printer to have 5x7 though when i print from wifibooth it wants the paper from the casette and is printing as letter
https://1drv.ms/f/s!AuteM2zdHneAigG47cIsZUkPq2F2
update: when i do my collage then print it from gallery it does print 5x7 without zooming as i set my printer to have 5x7 though when i print from wifibooth it wants the paper from the casette and is printing as letter
Re: landscape printing
@Zoobaz I just want to double-check that for sure you see 5x7 in the event you have selected. Keep in mind that if you change the event, the paper size will change too (4x6 is the default)
Here is the screen you need to check: https://imgur.com/a/hzMtoew
Can you see the part I circled in red? If that says something other than 5x7, then that is why it is not working.
Can you try the following trick:
1. print a collage from wifibooth
2. now go back to that layout/size control and open it. Since you printed something Wifibooth will now tell you which paper sizes it detected are present, because this information is available from iOS *after* the first print. Perhaps what is happening, is that the separate paper try is not detected by iOS until after the first print. Perhaps you can now select "5x7 (Available)" which is going to route to the correct tray.
@FeRDNYC I appreciate your help here too! Thank you.
Here is the screen you need to check: https://imgur.com/a/hzMtoew
Can you see the part I circled in red? If that says something other than 5x7, then that is why it is not working.
Can you try the following trick:
1. print a collage from wifibooth
2. now go back to that layout/size control and open it. Since you printed something Wifibooth will now tell you which paper sizes it detected are present, because this information is available from iOS *after* the first print. Perhaps what is happening, is that the separate paper try is not detected by iOS until after the first print. Perhaps you can now select "5x7 (Available)" which is going to route to the correct tray.
@FeRDNYC I appreciate your help here too! Thank you.
Please write a review for Wifibooth on the Apple App store! Indie developers like me really need people like you to review their apps. Instructions on how to write a review: http://goo.gl/w8NsDI.
Re: landscape printing
yes i did try to print from wifibooth then went back to the application and yes it is 5x7 i dnt get it why its not working its zooming too much and the (available is only showing the letter size
https://1drv.ms/f/s!AuteM2zdHneAigG47cIsZUkPq2F2
i uploaded my layout page and taking photos
so.i retried it and now its giving better result though the right side is cropped uploaded pic
https://1drv.ms/f/s!AuteM2zdHneAigG47cIsZUkPq2F2
i uploaded my layout page and taking photos
so.i retried it and now its giving better result though the right side is cropped uploaded pic
Last edited by Zoobaz on Sat May 04, 2019 1:19 pm, edited 1 time in total.
Re: landscape printing
At that link you provided, I cannot see your "taking photos" setting screen.
Did you see that 5x7 was listed as "Available" after your first print, per my last post?
Did you see that 5x7 was listed as "Available" after your first print, per my last post?
Please write a review for Wifibooth on the Apple App store! Indie developers like me really need people like you to review their apps. Instructions on how to write a review: http://goo.gl/w8NsDI.
Re: landscape printing
now yes i do see it as 5x7 available but now my problrm the right side of the picture is cropped
https://1drv.ms/f/s!AuteM2zdHneAigG47cIsZUkPq2F2
https://1drv.ms/f/s!AuteM2zdHneAigG47cIsZUkPq2F2
Re: landscape printing
You are making great progress, almost there.
In the print popover, try setting “RIGHT INSET” to 30. You will need to play with it to get it right for your printer. Or, if your printer can turn off overscan then that is easiest
In the print popover, try setting “RIGHT INSET” to 30. You will need to play with it to get it right for your printer. Or, if your printer can turn off overscan then that is easiest
Please write a review for Wifibooth on the Apple App store! Indie developers like me really need people like you to review their apps. Instructions on how to write a review: http://goo.gl/w8NsDI.
Re: landscape printing
@FeRDNYC I appreciate your help here too! Thank you.
Happy to! Printing is kind of my wheelhouse, all the way back to my very first paid programming gig.
That being said,
If you open up Print Center on the printer-connected iOS device while printing is in progress, what does that show for the job parameters?
- (Paper size would be listed in "Options", looks like.)
http://gdlp01.c-wss.com/gds/7/030002781 ... f#page=202
...I'm as shocked as anyone, finding out this actually proved to be a useful troubleshooting step.
Good luck, @Zoobaz! Sounds like things are pretty much coming together now. Hopefully with the adjustments Tim suggested for the print inset parameters, your print layout will be all set. (And even more hopefully, still in time for your event?)
Re: landscape printing
so @tim and @FeRdNYC thank you so much for your help i was actually able to make it like i want it the right thing i put it at 40 and it finally gave me the picturr i wanted
again thank you so much
im happy because tomorrow is my event its a graduation for primary school and its their first time so im excited and scared lol
update: the event was amazing and was successful kids enjoyed it
again thank you so much
im happy because tomorrow is my event its a graduation for primary school and its their first time so im excited and scared lol
update: the event was amazing and was successful kids enjoyed it
Re: landscape printing
That's AWESOME! I'm so glad you were able to get it working in time for your event and that the kids were happy. Well done!
Please write a review for Wifibooth on the Apple App store! Indie developers like me really need people like you to review their apps. Instructions on how to write a review: http://goo.gl/w8NsDI.